LIMITED WARRANTY
This Andis product is warranted against defective material or workmanship for one year
from the date of purchase. All implied warranties arising and by virtue of State law shall
also be limited to one year. Any Andis product determined to be defective in material or
workmanship during the warranty period will be repaired or replaced without cost to the
consumer for parts and labor. The defective product must be returned with proof of pur-
chase and $6.50 to cover cost of handling, to any Authorized Andis Repair Station or to:
Andis, 1800 Renaissance Blvd., Sturtevant, Wisconsin 53177 USA or IN CANADA
please call 1-800-558-9441. Enclose or attach a letter describing the nature of the prob-
lem. Due to foreign matter sometimes found in hair, clipper blades or resharpening of
blades are not subject to the one year warranty. The blade set has a 10 Day Limited
Warranty. If the blade set fails to cut, it will be resharpened free of charge if returned
within 10 days of purchase. Send your blade set postage prepaid with the original pur-
chase receipt to: ANDIS COMPANY, ATTENTION: Service Department, 1800
Renaissance Blvd, Sturtevant, Wisconsin 53177 (U.S. & Canada only). Andis will not be
liable under this warranty for any defect, failure or malfunction of any of its products
caused by normal wear, abuse, misuse, unauthorized adjustments or disassembling.
Andis will not be liable for any consequential damages resulting from any defect in mate-
rial or workmanship of any of its products. Some States do not allow limitations on how
long an implied warranty lasts or exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. The Warranty
gives you specific legal rights, and you may also have other rights which may vary from
State to State.
Date Purchased __________________________ Model ____________________
Form # 21456 ©2004 Andis Company, USA Printed in U.S.A.
®
Congratulations –
you just went First Class
when you bought this Andis Clipper.
Careful workmanship and quality design
have been the hallmarks of Andis products
since 1922.
FACTORY REPAIR SERVICE
When the blades of your Andis Clipper become dull after
repeated use, it is advised to send your blades to an Andis
Authorized Service Station mentioned to right for resharpen-
ing. If you wish your clipper to be serviced as well, it should
be carefully packed and mailed either Parcel Post Insured, or
U.P.S.
Model MBA
You can always set the blades for a coarser cut by attaching
any of the snap-on blade attachments made for your Andis
Clipper. To use blade attachment, slip the cutter blade teeth
into blade attachment. Snap the blade attachment down, they
snap on and off easily. These attachments guide hair into the
clipper blades and give you precise control of hair lengths.
The length of trim is indicated on the blade attachment. Use
the clipping guide on the other side of this sheet to find the
approximate lengths of cut. Different blade angles in relation
to the skin, thickness and texture of the hair will vary the cut-
ting length.
Please see enclosed slip sheet
for all Andis Authorized repair stations
CLIPPING GUIDE
Approx.
Clipping Length
Description
Directions
of Cut
Standard Andis Blade
With hair grain
1/16"
Against hair grain
1/32"
1/16" Blade Attachment
With hair grain
3/16"
Against hair grain
3/32"
1/8" Blade Attachment
With hair grain
1/4"
Against hair grain
1/8"
1/4" Blade Attachment
With hair grain
3/8"
Against hair grain
1/4"
3/8" Blade Attachment
With hair grain
1/2"
Against hair grain
3/8"
1/2" Blade Attachment
With hair grain
5/8"
Against hair grain
1/2"
3/4" Blade Attachment
With hair grain
7/8"
Against hair grain
3/4"
1" Blade Attachment
With hair grain
1 1/8"
Against hair grain
1"
