Carmanah R829, Руководство пользователя

Страница: 33 / 33

Owner’s Manual |
R829
33
Carmanah Technologies Corp. Copyright © 2006
Document number: MAN_ROAD_R829 Owner's Manual 37234_vC
Last revised: November 7, 2006
6.2 Troubleshooting
I'm having trouble configuring the R829 Interface Box, what should I do?
Ensure that the drivers for the Interface Box are correctly installed. Check that the Interface Box
is connected to your computer with the supplied USB cable. Unplug the Interface Box from the
computer, plug it back in and try configuring it again. The baudrate should be set to 115200, the
Mode should be secondary. The default channel of the School Zone Beacon is Channel 0, if you
haven't changed the configuration of the R829 School Zone Beacon select Channel 0 ( factory
default is 0 ). The Interface Box and School Zone Beacon must be on the same channel in order
for them to communicate properly.
I'm having trouble communicating with the School Zone Beacon from my computer, what should I
do?
Are the beacons on the School Zone flashing? If they are not, the radio on the School Zone
Beacon is not turned on! Flip the override switch on the School Zone Beacon to enable the radio.
As soon as you flip the switch, the beacons will start flashing. If the Interface Box is configured
properly, the green light on the side of the box will now turn on.
If the green light on the side of the Interface Box is not on, the interface box is either not
configured properly or is not in range. If you are standing near the School Zone Beacon, and the
green light is on, you are in range and the issue may be with the Interface Box configuration. It is
possible to stand too close to the School Zone Beacon, if you are having communication
problems, you may need to back up slightly. Run through the troubleshooting step for configuring
the Interface Box as shown above. While configuring the Interface Box, ensure that you have
selected the port on your computer or laptop that the Interface Box is connected to.