800 SERIES USER MANUAL
PROGRAMMING
Editing the Lantern Date and Time
(Non-GPS Units Only)
Lantern Date and Time are used for data logging
and for controlling the calendar function. The 800
Series lantern (without GPS) has an internal clock
which it uses for logging activity. The lantern will be
factory programmed in Coordinated Universal Time
(UTC). You may re-program the lantern to local date
and time if desired. In the event that the lantern
battery pack is disconnected, verify the date settings
and reset if required.
GPS-equipped units will be
synchronized to Coordinated
Universal Time (UTC). The date/time
settings on GPS-equipped units
cannot be modified.
To edit the lantern date:
1. If you have not already done so,
establish a connection to the
lantern.
2. The lantern LEDs will flash to
confirm the lantern is ready to
receive commands.
3. Navigate to the date menu
4. Scroll to the Month value (
ΠΠ
on)
5. Unlock the existing setting
6. Use the number keys to enter the
current month.
7. Lock the new setting
8. Scroll to the Day value (dAY)
9. Use the number keys to enter the
current day.
10. Lock the new setting
The lantern LEDs will flash to confirm
that the new setting has been locked.
To edit the lantern time:
1. If you have not already done so,
establish a connection to the
lantern.
2. The lantern LEDs will flash to
confirm the lantern is ready to
receive commands.
3. Navigate to the Time menu
4. Scroll to the hour value (HH)
5. Unlock the existing setting
6. Use the number keys to enter the
current hour (24-hour clock).
7. Lock the new setting
8. Scroll to the minute value (MM)
9. Use the number keys to enter the
current minute
10. Lock the new setting
11. The lantern LEDs will flash to
confirm that the new setting has
been locked.
15
© 2014, Carmanah Technologies Corporation. Revised July 2014. 69928_8XX_UserManual_RevB
