Carlton Hurricane RS, Руководство пользователя, Страница: 43 / 153

Hurricane Track MACHINE OPERATION
23
•
The E-STOP light will flash red quickly.
•
Release the E-STOP button by twisting
it clockwise. Release the E-STOP
button within 10 seconds or the unit will
power down.
•
The Active light will flash yellow.
•
Test controls for proper operation.
Read the radio control manual supplied
in the back of this manual for more
information.
•
Position machine at stump with cutter
wheel a slight distance from stump.
Do
not position machine near stump with
the cutter wheel engaged.
•
Raise cutter wheel clear of stump.
•
With engine at idle; engage clutch by
pushing the Clutch ON/OFF switch up
on the radio control transmitter and hold
for 3 seconds.
THE PT TECH CLUTCH WILL ONLY
ENGAGE WITH THE ENGINE SPEED
AT IDLE (BELOW 1100 RPM).
CHECK ENGINE RPM IF CLUTCH
WILL NOT ENGAGE. (Read the PT
Tech clutch manual.)
•
When started, the PT Tech Clutch will
automatically go through a series of
bumps to bring the cutter wheel up to
speed.
•
When clutch and cutter wheel are fully
engaged and cutter wheel is running
smoothly, increase engine speed to full
by pushing the engine throttle switch up.
DO NOT increase engine speed while
the clutch is engaging or a fault will
occur and you will have to start over
with the engine below 1100 RPM.
LIGHT PANEL
CLUTCH ON/OFF
SWITCH
THROTTLE SWITCH
– ENGINE RPM
ENGINE RPM
TO HIGH
INDICATOR –
MACHINE
CONTROL
PANEL