CARLO GAVAZZI EN61036, Инструкция по эксплуатации

Страница: 7 / 40

▲
▲
7
Programming
Energy meters
5
Measuring pages
11
17
If the RS422/485 is present, then “r” means that the
instrument is receiving data, while “t” means that the
instrument is transmitting data; this confirms that the seri-
al module is operating correctly and that the wiring is cor-
rect.
Phase sequence: 1.2.3 is cor-
rect and 3.2.1 is wrong.
“Err” stands for a reversed cur-
rent connection and “1.2.3”
shows its phase. See “Useful
information” on page 20.
▼
▲
▼ ▲
The scrolling of the measuring
pages is cyclic, at the end of the
cycle, you go back to the first
page on the left.
■
Access to the main menu
From the measuring and display
phase, press the
key, to
enter the programming menu,
when the password is request-
ed, enter the correct PASS value
by means of the
and
keys, then confirm it using the
key.
If the PASSWORD is correct
(when the instrument is new, it’s
equal to 0), you access the main
menu.
S
▼ ▲
S
S
S
Access to the main
menu
“AL” indicates
that the alarm is
active (for all
measuring pages).