5.4. Measuring procedure
After the cuff has been appropriately positioned the
measurement can begin. Remain still during your
measurement, do not flex muscles.
a) Remain seated quietly for 5 minutes before you
begin the measurement.
b) Press the ON/OFF button to begin. After press-
ing the ON/OFF button the pump begins to
inflate the cuff. In the display, the increasing
cuff-pressure is continually displayed.
c) When the device has detected the pulse, the heart
symbol in the display begins to blink.
d) After reaching the inflation pressure, the pump stops
and the pressure will release. The cuff pressure
(large characters) is displayed during the measurement.
e) When the measurement has been concluded, the
measured systolic and diastolic blood pressure values
and pulse will be displayed. (Pulse = number of heart-
beats each minute) Example (Fig.): Systolic 118,
Diastolic 73, Pulse 75. The measurement results are
displayed until you switch the device off or until the
device automatically switches off.
5.5. Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement
for any reason (e.g. the patient feels unwell), the
ON/OFF button can be pressed at any time. The device
then immediately lowers the cuff pressure automatically
and enters into sleep mode.
21
1
Pulse Detected -
Unit measuring
1
mmHg
mmHg
Содержание BP3NC1-2AFSA
