Carguard G 7050, Руководство пользователя

Страница: 20 / 88

20
G 2500 English
casing with a automatic nail set
6. Spare sensor should de mounted on where you can get the best operation quality.
7. Connect the contacts of ignition, starter circuit and other circuits by soldering and sealed for insulation.
IX. SYSTEM CONNECTION
14 PIN main connector
1. Red wire- System power supply wire
（
Please use 15A fuse and connect it to power supply te”
）
.
2. Green
–Black wire – Parking light relay co”Output
（
Connected with 7.5A fuse
）
.
3. Black wire-
System power supply wire“-” (Please make sure the wires are sturdy and reliable).
4. Green-Yellow wire
– Parking light relay co”output
（
Connected with 7.5A fuse
）
.
5. Blue wire- Car interior light or c
ar window electric control“-”Output
（
Maximun 300mA
）
.
6. Yellow wire
– Ignition lock “+” Input
7. Black-Red wire
–Latching relay control output “-”
（
System output,Maximun 300mA
）
.
8. Gray wire
– Siren control “+” output,or car horn control “+” output
（
Programmed setting, Maximun 1.5A
）
.
9. Orange -Purple wire
– Manual brake wire,connected to manual brake switch“-”.
10. Yellow-Black wire-
Auxiliary channel “-” output,appeares when activated by remote
（
Maximun 300mA,
programmed setting
）
.
11. Blue
–Red wire – Car door sensor “+” Input.
12. Blue-Black wire
–car door sensor “-” Input.
13. Orange - White wire
– Car trunk sensor “-” Input.
14. Orange -Gray wire
– Engine hood “-” Input.
6 PIN connector
（
Power door locks built-in relay
）
1. Blue wire
–Unlock com
2. Green wire
– Lock com
3. Black
–Red wire – Unlock NO
4. Black-Red wire-Lock NC
5. Blue--Black wire
–Unlock NC
6. Green-Black wire
– Lock NC
4 PIN Vibration sensor connector
1.
Sensor power 12V”.
2.
Sensor power supply“-”.
3.
Precautionary trigger zone “-” (Input).
4.
Main trigger zone “-” (Input).
4PIN Spare sensor connector
1.
Sensor power supply “+12V”.
2.
Sensor power supply “-”.
3.
Precautionary trigger zone “-” (Input).
4.
Main trigger zone “-” (Input).
2PIN “Override” button connector
2PIN Connector-
To connect ”Override” button
5PIN Receiver-transmitter antenna connector
5PIN connector-To connect with antenna
3PIN GSM/GPS module connector