Carguard G 7050, Руководство пользователя

Страница: 9 / 88

9
G 2500 English
please press
so the system will go back to “Quiet” status, then press this button repeatedly to
deactivate arm mode.
6. Activating arm mode with engine running
You can activate arm mode when the engine is running .You will need to
：
1
）
Start the engine.
2
）
Leave your car,close car door,engine hood and trunk.
3
）
Press button , car door locked.
4
）
Within three seconds after you finish step 3,press again,siren chirps 1 time and parking
light flashes 1 time.
LCD screen displays
：
Attention
！
Vibration and spare sensors are turned off under this feature
In order to deactivate arm mode when engine is running,please press ,close car door then
arm mode will be deactivated.
LCD screen displays
：
7. Auto arm mode
Press and hold until the remote beeps
（
or the LED indicator color of 1-way LED remote
turns green
）
,then press to turn on or turn off this feature
LCD screen displays
：
Attention
！
Please close car door under auto arm mode
（
Please refer to Multi-level security arming
mode setup chart
）
.
8. Auto re-arming
This feature needs to be programmed.If it has been programmed,no matter you have deactivated arm
mode intentionally or unintentionally, and car door is not closed or the engine is not on,the system will go
back to arm mode within 30 seconds automatically.
9. Arm mode types
When the car is under arm mode,alarm system will monitor whole areas and every sensor .If a sensor
has reponsed, it will trigger the siren.Siren signals are different by trigger zones
a) Vibration or spare sensors precautionary trigger zone siren signals.
Siren chirps 3 times,car parking light flashes 6 times.
LCD screen displays
：
b) Vibration or spare sensors main trigger zone siren signals.
Siren chirps and at the same time car parking light flashes for 30 seconds.
LCD screen displays
：