6
Vedpak 132_501186_Version 4_12.2017
211097
ACTIVATING COMPONENTS OUT OF VEHICLE’S ELEC-
TRICAL SYSTEM
While the HC-CARGO 211097 is in Power Probe Mode
and by using the Power Probe tip in connection with the
auxiliary ground lead, components can be activated right
on your hand, thereby testing their function.
Connect the negative auxiliary clip to the negative
terminal or ground side of the component being tested.
Contact the probe to the positive terminal of the
component, the green negative sign “÷“ LED indicator
should light GREEN indicating continnuity through the
component.
While keeping an eye on the green LED negative sign,
quickly depress and release the power switch forward
(+). If the green negative sign “÷“ LED went out and the
red positive sign “+“ came on, you may proceed with
further activation. If the green negative sign “÷“ LED
went off at that instant or if the circuit breaker tripped,
the Power Probe has been overloaded.
This could happen for the following reasins:
• The contact you are probing is a direct ground or
negative voltage.
• The component you are testing is short-circuited.
• The component is a high current component
(i.e., starter motor).
If the circuit breaker is tripped, reset it by waiting for it to
cool down and then depressing the reset button.
Connect the
negative auxiliary
clip
Connect the tip to
the positive terminal
of the bulb
Press the power
switch forward to activate
the bulb
Activate fuel pumps, magne-
tic clutches, starter solenoids,
cooling fans, blower motors,
lights etc.
