Adjusting the Light Mode
High Intensity Setting - Therapy Mode
Slide the switch “UP” and the Day
-Light emits
10,000 LUX of light at 12" -
14” from the lamp
- the
maximum light level recommended by experts. Do
not use your Day-Light for more than 60 minutes
per session in Therapy mode.
Low Intensity Setting
–
Task/Ambient Mode
Slide the switch “DOWN” and only 2 bulbs light,
emitting 7,000 LUX at 12" -
14” from the lamp. We
recommend moving the Day-Light further away or
angling it down over your work area for non-light
therapy purposes.
NOTE: After switching the Day-Light on, it takes
about three minutes before the light tubes reach full
intensity.
Adjusting Light Angle and Height
For optimum light therapy usage, you will now need
to adjust your Day-Light so that:
Lamp head is angled at about 30° from vertical;
Eyes face the approximate center of the lamp.
Angle of the Light
To set the angle of the lamp at about 30°, press the
silver button (1) at the top of the Arm, while
supporting the Lamp Head. Release the button
when the desired angle is achieved.
Height of the Light
Press the lower silver button (2), while supporting
the Lamp Head. Lift or lower the Lamp Head to the
height that works best for you and release the
button. Support the Lamp Head as it locks into
position.
NOTE: Face toward the Day-Light with eyes open
during therapy - it is not necessary nor
recommended to look directly into the light.
6
1
2
Day-Light User Guide
Eyes should be
positioned approximately
at the center of the lamp
30⁰
12”
-
14”
