CareTech CareIP, Руководство пользователя

Страница: 20 / 40

20
Connection
The CareIP Mobile is easy to install, if broadband/network connection shall
be used, connection is made with the enclosed network cable.
Normally the CareIP is set to use DHCP, which means that the unit
automatically will be assigned an IP address when connected to a network.
The CareIP should always be connected to the network as near incoming
broadband as possible.
•
Connect the power supply to the wall socket and the power supply
lead to the DC input socket
.
•
Connect the network cable from the broadband/network to the
Ethernet socket on CareIP
•
Turn the power switch to the I position.
•
Check that the “ON” indicator lamp has a steady green light.
•
The status light shall go off within 30 sec. if GSM network is detected.
•
Carry out a test alarm from the CareIP.
The power supply shall be placed so the information text
“Do not to unplug” is visible.
For further advice regarding installation, contact your supplier.
Installation must be performed only by authorized persons in
accordance with the instructions in the service manual.
1 11 1
2
22
2
1 11 1
2
22
2
Connectors on the back of the unit