Carestream DENTAL CS 7600, Руководство пользователя

Страница: 8 / 40

10 Chapter 2 CS 7600 System Overview
Scan & Go Overview (for Scan & Go models released from June 2012)
A new Scan & Go device is available from June 2012. The following improvements have been made to
the new Scan & Go device:
•
Faster scanning - Approximately 1/4 sec instead of 1 sec
•
No battery - Therefore no need for charging.
•
No on off switch - Turns on automatically when the USB is connected.
Figure 6 Scan & Go device (After June 2012)
1 USB 2.0 port
2 On/Off/Recording LED status indicator (blue)
Power Up: One Flash & Beep (Internal FW)
Beacon: Flashes blue every few seconds in idle mode (Not during Tagging)
Tagging OK: One flash (long) & 1 bleep (long)R
Tagging Fail: One Red flash (long) & 1 bleep (long)R
3 Connected to USB: LED status indicator (green):
4 Recording surface for imaging plate
5 Mounting adapter
4
1
3
2
5