CARESONO
PadScan HD 5 User’s Manual
3
Chemical medicines or gas
Sudden shaking of the device or drops
Maintain Probe Safety
Do not immerse the probe in water or any other liquids.
Keep probe away from heat sources.
To avoid damaging the cable or transducer connector, handle them with care. Do not bend or pull
probe cable.
It is recommended to use standard ultrasound gel only. Other substances may damage the probe
and the probe cable.
A dirty probe may decrease the accuracy of the system. Keep the probe clean. Use standard
detergent or clean water to clean the ultrasound gel off the probe.
The probes are not interchangeable between units. They are calibrated to specific main units. If
changing the probe associated with a machine, it is necessary to calibrate the machine before using.
Confirm that the probe and cable are normal before and after each examination. A defective probe
may cause electric shock to the patient.
Handling the Device
Always pull out the power plug.
Drop, shake, or hit the probe may cause malfunction or inaccuracy. Do not drop, shake, orhit the
probe or the device.
In Case of Device Failure
If it is suspected that the device is not operating properly, turn OFF the power and unplug the power.
Contact CARESONO technical support for help.
Manufacturer Declarations
WARNING! Changes or modifications not expressly approved by CARESONO could void the user’s
authority to operate the equipment.
Warning: To ensure the continued safe use of the equipment, modifications must be inspected
and tested by approved departments.
Warning: It is strictly prohibited to perform any modifications to the device without prior
permission.
Warning: User swill assume responsibility of the risks associated with the use of the device after
recommended service life.
