CARESONO
PadScan HD 5 User’s Manual
2
CAUTIONS AND WARNINGS
Read carefully before use
Only trained technicians should operate this device. The operator must read the Owner’s manual entirely
and refer to any additional training materials before using the device.
Check and maintain the device regularly.
Do not disassemble or attempt to repair the device and the probe. ONLY CARESONO-trained
technicians may service the unit.
Equipment Checks
1.
Make sure all cables are properly connected.
2.
Make sure the device is properly functioning.
3.
Keep the device away from sunlight and keep dry.
Pre-scan Checks
1.
Make sure the probe is properly connected.
2.
Make sure no water, chemicals, or other materials are on the device.
Scanning Checks
1.
Do not drop the probe. Always use ultrasound gel with the probe to ensure proper contact.
2.
Pay attention to the main parts of the device. If strange noises or smells are emitted from the device,
stop the operation at once, unplug all cables, and power OFF. Contact CARESONO technical support
for help.
3.
Patients must not touch other electrical equipment during examination.
4.
Do not cover the air vent of the device.
Post-scan Checks
1.
Turn OFF the power.
2.
Pull out the power plug from the power sockets.
3.
Clean the device and the probe.
Maintain Device Safety
This device should avoid the following:
Spraying water
High humidity
Poor draught
Direct sunlight
Dust
Gas with salt or sulfur
Warning: Do not plug or unplug the probe into the system while the power is ON. Connecting
the probe while the power is ON may cause damage to the probe and the main unit.
Warning: Do not use if any part of the device or if cables display any signs of damage.
