GB IMPORTANT
Keep this instructions for future reference.
1. This is a Universal child restraint. It is approved to ECE R44/04 Group II & III series of amendments,
for general use in vehicles and it will fit most, but not all, car seats.
2. A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that the
vehicle is capable of accepting a Universal child restraint for this group.
3. This child restraint has been classified as “Universal” under more stringent conditions than those
which applied to earlier designs which do not carry this notice.
4. If in doubt , consult either the child restraint manufactured or the retailer.
Only suitable if the approved vehicles are fitted with 3 point safety-belts, approved to ECE R44/04
Group II & III or other equivalent standards.
NOTES
Please read through these instructions carefully before using the child car seat for the first time. You
risk endangering your child’s life if you use the product incorrectly.
APPLICABILITY
The child car seat is suitable for weight categories II to (Group II-III ), which means children with a
body weight between 15kg and 36kg
Mass Group II : 15kg-25kg
Mass Group III : 22kg-36kg
Only suitable if the approved vehicles are fitted with 3 point safety-belts, approved to UN/ECE
Regulation No.16 or other equivalent standards.
DIAGONAL BELT
LAP BELT
SAFETY INSTRUCTIONS
Please invest a few minutes in your child s safety to read these instructions. Many injuries ,which are
easily avoidable, are caused by carelessness and incorrect use.
•
The instructions can be retrained on the child restraint for its life period.
•
This child seat can only be installed forward facing using a 3-point vehicle belt.
•
Do not use this child seat at home. It is not designed for home use and should only be used in your
car.
•
Before each journey check whether the child car seat is installed firmly.
•
Do not change the child car seat in any way.
16
Fejan_manual_1653606-08.indd 16
2016-04-21 15:13
