22
Now with your Bionase from Caremaxx
you can quite easily carry out yourself what
until recently was only available as a very
cost-intensive therapy in special centres.
Diodes that are able to emit red light of
exactly the right wavelength (approx.
660nm) have been developed for the
Bionase. Alleviation of allergic symptoms
and lessening of the over-sensitivity of the
nasal mucosa sets in at this wavelength.
The benefits of your phototherapy with
Bionase:
• Phototherapy is a drug-free treatment.
• The highly effective application lasting
only approx. 4 minutes can be carried
out practically anywhere.
• The treatment has no effect on other
organs or body parts due to its use
locally.
The typical symptoms of hay fever were
significantly reduced in a clinical test
using the Bionase. Some symptoms were
alleviated or even eliminated completely
in a matter of only a few hours. In the
majority of patients it was possible to
identify a clear improvement in the
condition within two weeks.
3 Starting up
Packaging / scope of supply
We would like our high-quality medical
products to reach you in the same condition
as they left us. For this reason your Bionase
is packed in a sturdy protective package
made from environmentally compatible
materials. If you do not want to use the
box for storing the appliance, it may be
sent for recycling with your waste paper.
Please dispose of the plastic films at the
local waste site. The package contains the
following parts:
• 1 Bionase appliance
• 1 Battery (monobloc 9 Volt, 6LR61)
• 1 Nasal applicator
• 1 Instructions for use
Please consult your dealer if you discover
that the appliance is damaged or fails to
function as expected after unpacking.
Activation / replacing the battery
Important
: The 9V monobloc battery
is already inserted on delivery of the
appliance. The contacts are protected
with an insulating strip to prevent the
battery from discharging. This insulating
strip must be removed prior to starting
the appliance up for the first time. Press
down on the symbol on the battery
compartment lid (back of the appliance)
and at the same time slide it in the
direction of the arrow. Now pull out the
insulating strip by the tab. Then replace
the battery compartment lid and slide it
upwards until it clicks audibly into place.
After approx. 100 applications, the green
pilot LED will flash after pressing the ON
button if the battery power is insufficient
for another application. Open the battery
compartment (as describes above), remove
the spent battery and insert a new 9 volt
monobloc battery 6LR61 (in the position
shown inside the battery compartment).
Close the battery compartment again.
Caution
! Batteries may not be disposed
of with your domestic waste under any
