17
2.1 Placing and removing the batteries.
Turn the camera upside-down.
Push down the battery cover to open it.
Place 4 AA batteries in the battery
compartment, with the plus (+) and minus
(-) poles as shown. Replace the cover until
a click is heard.
Batteries can be placed in the
receiver
in
the
same
manner.
Batteries work for approximately 5 hours
(if infra-red LED is switched off).
In order to prevent leakage, remove the
batteries if you do not use the baby phone
for long periods.
Ensure that batteries have been placed
correctly. It is also possible to use mains
adaptors. First remove the batteries and
then plug the mains adaptor into the
adaptor socket
.
2.2 Installing the camera
1. Place the camera in the desired place
2. Plug in the adaptor (or use batteries)
3. Hold the camera’s round eye between
your thumb and index finger, and turn
in the desired direction (turning angle
is 30°).
4. Select one of the 4 channels (CH1, CH2,
CH3, CH4) using the channel selector
.
Select the channel which does not
interfere with other wireless equipment.
Make sure that the camera channel is
the same as the receiver channel.
5. Switch on the camera using the On/Off
switch
.
