IMPORTANT WARNINGS
CAREL bases the development of its products on several years’ experience in the HVAC field, on continuous investment in technological
innovation of the product, on rigorous quality procedures and processes with in-circuit and function tests on 100% of its production, on
the most innovative production technologies available on the market. CAREL and its branch offices/affiliates do not guarantee, in any
case, that all the aspects of the product and the software included in the product will respond to the demands of the final application,
even if the product is built according to state-of-the-art techniques. The client (builder, developer or installer of the final equipment)
assumes every responsibility and risk relating to the configuration of the product in order to reach the expected results in relation to the
specific final installation and/or equipment. CAREL in this case, through specific agreements, can intervene as consultant for the positive
result of the final start-up machine/application, but in no case can it be held responsible for the positive working of the final
equipment/apparatus.
The CAREL product is a state-of-the-art product, whose operation is specified in the technical documentation supplied with the product
or can be downloaded, even prior to purchase, from the website
www.carel.com
.
Each CAREL product, in relation to its advanced technological level, needs a phase of definition / configuration / programming /
commissioning so that it can function at its best for the specific application. The lack of such phase of study, as indicated in the manual,
can cause the final product to malfunction of which CAREL can not be held responsible.
Only qualified personnel can install or carry out technical assistance interventions on the product.
The final client must use the product only in the manner described in the documentation related to the product itself.
Without excluding proper compliance with further warnings present in the manual, it is stressed that in any case it is necessary, for each
Product of CAREL:
•
To avoid getting the electrical circuits wet. Rain, humidity and all types of liquids or condensation contain corrosive mineral substances
that can damage the electrical circuits. In any case, the product should be used and stored in environments that respect the range of
temperature and humidity specified in the manual.
•
Do not install the device in a particularly hot environment. Temperatures that are too high can shorten the duration of the electronic
devices, damaging them and distorting or melting the parts in plastic. In any case, the product should be used and stored in
environments that respect the range of temperature and humidity specified in the manual.
•
Do not try to open the device in any way different than that indicated in the manual.
•
Do not drop, hit or shake the device, because the internal circuits and mechanisms could suffer irreparable damage.
•
Do not use corrosive chemical products, aggressive solvents or detergents to clean the device.
•
Do not use the product in application environments different than those specified in the technical manual.
All the above reported suggestions are valid also for the control, serial unit, programming key or nevertheless for any other accessory in
the product portfolio of CAREL.
CAREL adopts a policy of continuous development. Therefore, CAREL reserves the right to carry out modifications and improvements on
any product described in the present document without prior notice.
The technical data in the manual can undergo modifications without obligation to notice.
The liability of CAREL in relation to its own product is regulated by CAREL’s general contract conditions edited on the website
www.carel.com
and/or by specific agreements with clients; in particular, within the criteria consented by the applicable norm, in no way
will CAREL, its employees or its branch offices/affiliates be responsible for possible lack of earnings or sales, loss of data and
information, cost of substitute goods or services, damage to things or persons, work interruptions, or possible direct, indirect, incidental,
patrimonial, of coverage, punitive, special or consequential in any way caused damages, be they contractual, out-of-contract, or due to
negligence or other responsibility originating from the installation, use or inability of use of the product, even if CAREL or its branch
offices/affiliates have been warned of the possibility of damage.
Disposal of the product
The appliance (or the product) must be disposed of separately in accordance with the local waste
disposal legislation in force
Содержание PlantVisorPRO
Страница 1: ...PlantVisorPRO Embedded Foglio istruzioni Technical leaflet...
Страница 2: ...Technical leaflet...
Страница 5: ......
Страница 12: ......