10
+030220575 - 1.1 - 04.12.2014
ENG
The confi guration procedure is illustrated in Figure 2.b.
STEP 2
STEP 1
STEP 2
STEP 1
doble click
STEP 2
STEP 3
STEP 4
STEP 5
Fig. 2.b
2.3 Dashboard: main view
The “Dashboard” tab shows all of the compressor racks selected for the Floating suction function. A triangle
represents the status of the set point adaptation, from the minimum to the maximum value.
In this tab, users can enable or disable the plug-in, access the confi guration page and the monitoring page
relating to each rack.
STEP 2
STEP 2
START
STOP
Enter configuration
and monitoring
pages
Minimum setpoint
Maximum setpoint
Fig. 2.c
From the “Dashboard”, clicking on the pRack description (blue), users can access the confi guration and
monitoring view of the plug-in.
These two screens are displayed diff erently, depending on whether the associated units feature the Smooth
lines function, i.e., whether or not the association has been created with the Smooth lines fl ag checked (see
paragraph 2.2 for details).