background image

3

ENG

“heaterSteam” +0300075EN - rel. 1.2 - 29.09.2015

WARNINGS

The humidifi ers manufactured by CAREL Industries are advanced products, 
whose operation is specifi ed in the technical documentation supplied with 
the product that can be downloaded, even prior to purchase, from the 
website www.carel.com. Every product made by CAREL Industried, in relation 
to its advanced level of technology, requires a qualifi cation/ confi guration / 
setup phse in order to best fulfi l your specifi c application. The lack of such 
phase of study, as indicated in the manual, can cause the fi nal product to 
malfunction, of which CAREL Industries cannot be held responsible. The 
client (builder, developer or installer of the fi nal equipment) assumes all 
responsibility and risk relating to the confi guration of the product in order to 
achieve the expected results in relation to the specifi c fi nal installation and/
or equipping. In this case, subject to specifi c agreements, CAREL Industries 
acts as a consultant for the success of the installation / start-up / use of the 
machine, but in no case does it accept liability for proper operation of the 
humidifi er and of the fi nal plant, should  the warnings and recommendations 
in this manual or in any other technical documentation of the product not 
be followed. In particular, in addition to the obligation to observe the above 
mentioned warnings and recommendations for proper use of the product, we 
recommend paying attention to the following warnings: 

DANGER ELECTRIC SHOCK: 

The humidifi er includes live electrical parts. 

Disconnect the power supply before accessing internal parts, in case of 
maintenance and during installation.

DANGER WATER LEAKS:

 The humidifi er automatically and constantly fi lls/

drains quantities of water. Malfunctions in the connections or humidifi er may 
cause leaks.

DANGER OF BURNS:

 The humidifi er contains hot parts and delivers steam 

at 100 °C / 212 °F.

• 

The product is designed exclusively to humidify rooms either directly or 
through distribution systems (ducts). 

• 

Installation, operation and maintenance must be performed by qualifi ed 
personnel, aware of the necessary precautions and able to perform the 
required operations correctly. 

• 

All operations on the product must be carried out according to the 
instructions given in this manual and on the labels applied to the 
product. Any uses or modifi cations unauthorized by the manufacturer are 
considered improper. CAREL Industries denies all responsibility for such 
unauthorized uses. 

• 

Do not attempt to open the humidifi er in any way other than the ones 
described in the manual.

• 

Follow all local regulations while installing the humidifi er.  

• 

Keep the humidifi er out of the reach of children and pets. 

• 

Do not install and use the product near objects that can be damaged 
by contact with water (or condensate). CAREL Industries denies all 
responsibility for direct or indirect damage as a result of loss of water from 
the humidifi er. 

• 

Do not use corrosive chemicals, aggressive solvents or detergents to clean 
the internal or external parts of the humidifi er, unless specifi cally indicated 
in the user’s manual.

CAREL Industries adopts a continuous development policy. Therefore, CAREL 
reserves the right to carry out modifi cations and improvements to any 
product described in this document without prior notice. The technical data 
in the manual can undergo modifi cations without forewarning. The liability 
of CAREL Industries in relation to its own product is governed by CAREL 
Industries general contract conditions published on the website www.carel.
com and/or by specifi c agreements with clients; in particular, within the limits 
set by the applicable law, in no way will CAREL Industries, its employees or 
its branch offi

  ces/affi

  liates be responsible for any lack of earnings or sales, 

loss of data and information, cost of replacement goods or services, damage 
to objects or persons, work interruptions, or any direct, indirect, accidental, 
patrimonial, coverage, punitive, special or consequential damage in any way 
caused, be they contractual, out-of-contract, or due to negligence or other 
responsibility originating from the installation, use or inability of use of the 
product, even if CAREL Industries or its branch offi

  ces/affi

  liates  have  been 

warned of the possible damage.

ATTENTION

NO POWER 

& SIGNAL 

CABLES 

TOGETHER

READ CAREFULLY IN THE TEXT!

Separate the probe cables and the digital input cables as much as possible 
from the inductive load and power cables to prevent possible electro-
magnetic interference. 
Never introduce power cables and signal cables (including those of electric 
control board) into the same cable troughs.

The installation of the product must absolutely include the grounding 
connection, using the special yellow-green terminal on the terminal block.  
Do not use the neutral as grounding connection.

DISPOSAL

The humidifi er consists of metal parts and plastic parts. With reference to the 
European Parliament and Council Directive 2002/96/EC issued on 27 January 
2003 and the related national implementation legislation, please note that:

1. 

WEEE cannot be disposed of as municipal waste, said waste must be 
collected separately;

2. 

the public or private waste collection systems defi  ned by local legislation 
must be used.

3. 

the equipment may contain hazardous substances: the improper use or 
incorrect disposal of such may have negative eff ects on human health 
and on the environment;

4. 

the symbol (crossed-out wheeley bin) shown on the product or on the 
packaging and on the instruction sheet indicates that the equipment has 
been introduced onto the market after 13 August 2005 and that it must 
be disposed of separately;

5. 

in the event of illegal disposal of electrical and electronic waste, the 
penalties are specifi ed by local waste disposal legislation.

Warranty for materials: 

2 years (from the manufacture date, excluding 

consumables).

Certifi cation: 

the quality and safety of CAREL products are guaranteed by 

CAREL’s ISO 9001 certifi ed design and production system, as well as 

 

marking.

Содержание heaterSteam UR Series









































































Отзывы: