Carel compactSteam XL, Руководство пользователя, Страница: 20 / 54

2 0
Fig. 5.a
ENG
“compactSteam XL” +030222060 - rel. 1.2 - 20.12.2010
installer
user
ser
vic
e
5.3 Activating Manual Drain
Press and hold the “drain” button on the front of the unit until the cylinder
is drained.
5.4 Resetting the hour counter
The hour counter should be reset every time the cylinder is changed in
order to reset and restart the internal maintenance timer:
1. Switch CompactSteam XL off .
2. Press and hold both buttons “Reset” and “Drain” and switch
CompactSteam XL back on. When the branch
blinks; release
buttons.
3. Press and hold “reset” until the display shows 03. WARNING: DO NOT
confi rm any value higher than 04. If 05 or higher is displayed, press
“reset” until the display goes back to the normal operating mode and
restart from step 1.
4. Press “drain” (minimum 1 second) to confi rm: the hour counter will be
reset at once and the humidifi er will go back to the normal operating
mode.
5. OPERATING THE COMPACTSTEAM XL
5.1 Displaying Information
By pressing the “reset” button for 2 seconds, the display will loop from
amperage to production in % of the maximum production to the hour
counter and back to amperage ( fi g. 5.a):
1. Amperage: it is the value of the current that fl ows through the water
making it boiling off (default display)
2. Production %: it is the current production expressed as a percentage of
the humidifi er’s capacity
3. Hour counter, expressed in tens; for instance, when the display shows
13 the real hour value will be between 130 and 139 hours.
The maximum display is 199 = 1990 hours
This display remains until the reset is done.
5.1.1 Select Signal Type
To change the default setting, it is necessary:
1. Turn compactSteam off .
2. Turn compactSteam on again, while holding the two buttons, “reset/
sel” and “drain”, until the display shows“00” and the spanner symbol
fl ashes; then release the two buttons.
3. Then hold the “reset/sel” button to scroll the numeric parameters on
the display. Hold “reset/sel” for a few seconds until the display shows “02”.
WARNING: If the display shows a value higher than “02” do not confi rm,
but rather press “reset/sel” until the display returns to normal operating
mode and start again from point 1.
4. Press the “drain” button for at least 1 second to confi rm the value: the
display will show “P1” for 1 second and then the value of parameter P1
currently set will be displayed alongside.
5. Pressing “reset/sel” switches the value of P1 between “0” and “1”: 0 =
humidistat; 1 = external 0 to 10 V modulating signal
6. Press the “drain” button for at least 1 second to confi rm the new value
of parameter P1 and return to normal operating mode.
7. Turn compactSteam off : now clima can be connected, following the
diagramm in Fig. 3w using shielded cables with a minimum cross-section
of 0.5 mm2 (not included).
5.2 Changing The Maximum Production
The maximum production can be adjusted between 20% to 100% of
the nominal production in steps of 5% in order to suit the environment
characteristics. CH009V2000 and CH009V2L00 Maximum production is
factory set at 70%.
1. Switch CompactSteam XL off .
2. Press both and hold both buttons “Reset” and “Drain” , and switch
CompactSteam XL back on. When the wrench blinks;
release the 2
buttons.
3. Press “reset” until the display shows 01. WARNING: DO NOT confi rm
any value higher than 04. If 05 or higher is displayed, press “Reset” until
the display goes back to the normal operating mode and restart from
step 1.
4. Press “drain” (minimum 1 second) the display shows “P0” then the
current Maximum Production Percent and “ set ”.
5. Press “reset” to change the Maximum Production in steps of 5%
between 20% and 100%.
6. Press and hold “drain” (minimum 1 second) when done to confi rm the
new Maximum Production and exit to the normal operating mode.