CareFusion BabyCO Meter, Руководство по эксплуатации

Страница: 31 / 282

29
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The BabyCO is intended for use in the electromagnetic environment specified below.
The customer or the user of the BabyCO should assure that it is used in such an
environment
Emission Test Compliance Electromagnetic Enviroment -
Guidance
RF emissions
CISPR 11
Group 1 The BabyCO uses RF energy only for its
internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment
RF emissions
CISPR 11
Group B The BabyCO is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes
Harmonic emissions
IEC61000-3-2
Not Applicable
(battery powered)
Voltage fluctuatuins /
flicker emissions
IEC61000-3-3
Not Applicable
(battery powered)
Guidance and Manufacturer’s Declaration – Electromagnetic Immunity
The BabyCO is intended for use in the electromagnetic environment specified below.
The customer or the user of the BabyCO should assure that it is used in such an
environment
Immunity Test IEC 60601 test
level
Compliance
Level
Electromagnetic
Enviroment -Guidance
Electrostatic
discharge (ESD)
IEC61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should be
at least 30%.
Electrical fast
transient / burst
IEC61000-4-4
± 2 kV for power
supply lines
± 1 kV for input /
output lines
Not Applicable
(Battery
Powered and
Serial cable
<3m)
Mains power quality should
be that of a typical
commercial or hospital
environment.
Surge
IEC61000-4-5
± 1 kV line(s) to
line(s)
± 2 kV line(s) to
earth
Not Applicable
(battery
Powered)
Mains power quality should
be that of a typical
commercial or hospital
environment.
Voltage dips,
short
interruptions
<5% U
T
(>95 % dip in U
T)
For 0.5 cycle
Not Applicable
(battery
Powered)
Mains power quality should
be that of a typical
commercial or hospital