CareFusion Alaris 8210 Series, Техническое и сервисное руководство

Страница: 8 / 56

2-2 Alaris
®
SpO
2
Modules
Technical Service Manual
CHECKOUT AND CONFIGURATION
>Select an Option
or EXIT
EXIT
Factory default:
No
PC Unit
Shared Infusion Settings
Pump Module
SPO2 Module
PAGE
DOWN
System Configuration - Module
• If Factory Default is No , then one or
more of the configuration settings has
been changed. If desired,
Factory
Default can be selected and set to Yes ,
which will set all configuration settings to
their factory default.
2.3.2 Factory Default Setting
To allow changes to be made to System
Configuration parameters:
1. Hold
OPTIONS
key at power up.
2. Press Factory default soft key.
3. Press No soft key.
4. To accept change, press
EXIT
soft key.
2.3.3 Configuration Setup Notes
• Pressing
EXIT
soft key while in a
System Configuration - Module screen
immediately powers system down, with
no "Powering Down" display.
• Pressing
EXIT
soft key while in a System
Config -
SPO2
screen returns display to
main System Configuration - Module
screen.
• Pressing
CONFIRM
soft key while in a
System Configuration option screen:
- accepts existing setting or setting
change
- displays next option setting screen (if
applicable) or returns display to System
Config - SPO2 screen
• Pressing PC Unit’s
CANCEL
key while in
a System Configuration option screen:
- leaves setting unchanged
- returns display to System Config - SPO2
screen
2.4 CONFIGURATION SETUP
To change an option setting, ensure the
Factory default setting is No .
2.4.1 Access System Configuration Options
1. Hold
OPTIONS
key at power up.
2.3 CONFIGURATION OPTIONS AND
SETUP - GENERAL (Continued)
2.3.1 Configuration Notes (Continued)
>Select an Option
or EXIT
EXIT
Factory default:
Yes
System Configuration - Module
PC Unit
Shared Infusion Settings
Pump Module
SPO2 Module
PAGE
DOWN
EXIT
System Configuration
Factory Default
Settings?
Yes
No
Selection of Yes sets all
System Configuration
parameters to the factory
default setting.