Carefree
Installation Manual
F
REEDOM
WM
052563-001r9
11
Adjusting the IN Limit Switch
1. Retract the awning in completely.
2. Confirm that the arms are fully retracted. The motor should stop when the awning is fully retracted. If
the motor quits before the arms are fully retracted, it will be necessary to adjust the “
IN
” limit switch.
3.
Using a 4mm Allen wrench turn the “
IN
” limit switch. Clockwise increase time the motor runs during
retraction, counter clockwise reduces the time the motor runs.
NOTE: It is best to make the adjustments in increments of a single turn. 3 full turns of the screw
equals approximately 2” of fabric extension.
4. Extend and retract the awning several times to confirm that the adjustment is correct.
5. Repeat steps 3 and 4 as required until the awning retracts correctly.
