CareFlex SmartSeatPro II Скачать руководство пользователя

Страница: 29 / 40

UI SmartSeatPro

User Guide. Iss1 06/22

Simply slide the lateral inwards or outwards to adjust the width setting. Ensure the

hand wheel is tightened securely once the desired width is achieved. It is possible

to achieve 100mm range of adjustment per side. Note that on the maximum width

setting it is necessary to ensure the lumbar cushion wing is positioned rearward.

13c. Lateral Width Adjustment

There are multiple approaches to adjusting

the lateral height:

1. Large changes in height setting can

be achieved by adjusting the lumbar

cushion height on the centre pillar.

2. Smaller changes in height setting can

be achieved by adjusting the lateral

pad position on the lateral metal work.

View the chair from the front and push

the covering to one side to expose the

bracket. By using a 10mm spanner to

loosen the 2 x M6 bolts (A), the pad

can be repositioned. Three steps are

available, each representing 20mm of

movement. Ensure the 2 x M6 bolts

are tightened prior to use. It may

be easier to rotate the wing on the

lumbar cushion element rearwards to

gain better access to the brackets.

3. Each lateral can, if desired, be rotated

by 180° and fitted on the opposite

side of the chair. The effect of this is

to provide further options for height

adjustment quickly and simply. The

range that can be achieved by doing

so is detailed in the lateral selection

guide next.

•

The adjustable laterals should not

be used to control trunk position for

someone who is highly agitated, or

for those with severe uncontrolled

movements. There is a danger that

if the user leans forward and then

moves backward with force they may

injure their back against the firm

support of the lateral structure.

13d. Lateral Height Adjustment

Loosen the 2 x M6 bolts to reposition

the pad.

Содержание SmartSeatPro II









































Результаты поиска

Содержание SmartSeatPro II

Отзывы:

Похожие инструкции для SmartSeatPro II

Бренды по названию

Популярные бренды

CareFlex SmartSeatPro II, Быстрое руководство пользователя

Результаты поиска

Содержание SmartSeatPro II

Отзывы:

Похожие инструкции для SmartSeatPro II

Бренды по названию

Популярные бренды