5.0 OPERATION AND USE
Figure 10: Remove the Mesh Cover
1. Refer to Figure 3 and Figure 8. To extend the
guard rail, pull the guard extension rail out
from the main guard rail until the guard
extension rail button-clip clicks into position.
5.3 Remove the Guard Rail cont.
1. Refer to Figure 3 and Figure 9. Push and hold
the right-hand side guard rail button-clip,
then pull the guard rail until the button-clip
disengages from the hole.
2. Repeat step 1 for the left-hand side.
3. Make sure both button-clips have
disengaged from the holes, then pull the
guard rail out from the base frame.
4. To refit the guard rail, refer to Section 4.1.
1. Refer to Figure 10. Undo the Velcro fastener
and slide the mesh cover off the guard rail.
5.2 Retracting the Guard Extension Rail
The guard extension rail must be closed to let the
user exit the bed.
1. Refer to Figure 3 and Figure 8. To close the
guard extension rail, press and hold the
button-clip, then slide the guard extension
rail into the main guard rail.
5.3 Remove the Guard Rail
The guard rail can be removed to enable the user
to make the bed.
5.1 Extending the Guard Rail
The guard rail can be extended to give the user
better protection from bed roll-out.
5.4 Remove the Mesh Cover
The guard is supplied with the mesh cover fitted
to the guard rail, to remove for cleaning, please
do the following:
5.5 Refit the Mesh Cover
1. Refer to Figure 10. Slide the mesh cover onto
the guard rail and secure with the Velcro
fastener.
2. Make sure that the mesh cover is fully secure
before use.
Figure 8: Extend the Guard rail
Button-clip
1
Figure 9: Removing the Guard Rail
1
2
3
3
1
Note
: Make sure that the button-clip has
fully engaged into the hole.
