4.0 ASSEMBLY AND INSTALLATION
2
2
1
1
2
Figure 4: Assembly
A
1
1
B
C
D
2
Figure 5: Adjust the Base Width
Table 1: Bed Width / Frame Position
1. Refer to Figure 3 and Figure 4. Slot the guard
rail into the base-frame.
2. Push and hold the guard rail button-clips,
then push the guard rail into the base-frame
until the button-clips click into position in the
base frame holes.
1. Refer to Figure 3 and Figure 5. Push and hold
the button-clips on the base adjustment rail.
2. Slide the base adjustment rail out from the
baseframe until the button-clips click into
the required hole positions for your bed (see
Table 1).
Figure 6: Fit the Guard rail
1. Refer to Figure 6. Remove the mattress and
place the guard rail on the bed base.
4.1 Fitting the Guard Rail
The guard rail is packaged in two parts. To as-
semble, attach the guard rail to the base frame,
as follows:
4.3 Fitting the Guard rail to the bed:
.
Standard
Single
Small
Double
Standard
Double
King
Size
Bed
Width
900mm
1200mm
1350mm
1500mm
Position A
B
C
D
Figure 7: Replace Mattress
2. Refer to Figure 2 and Figure 7.
Replace the mattress on top of the guard rail.
Note
: Make sure that the button-clips
have fully engaged into the holes.
4.2 Adjusting the base width:
Note
: The following steps may require
two people.
Note
: Make sure that the button-clips
have fully engaged into the holes.
Note
: The following steps may require
two people.
WARNING
: The guard rail must be
positioned at least 320mm (12.5”) away
from the headboard.
