14
tHe FUnction oF tHe wireless PenDant
Your Wireless Pendant is a battery-operated transmitter that will activate your Smart Dialler.
It is waterproof and can be worn in the shower; it is not intended to be fully submersed in water for
long periods of time. Caution should be exercised when wearing it in the bath for lengthy periods.
Please note: YoU cannot Use tHe PenDant For 2 waY commUnication.
tHis is Done tHroUGH tHe Base station onlY.
Please take note oF tHe FollowinG Points:
1.
Your Wireless Pendant has a yellow button and two red buttons. The yellow button, when
pressed, will activate a loud chime sound on the Dialler and can be used to call for assistance
from someone who is within hearing distance of this audible chime.
the yellow button can
also cancel the smart Dialler if it has been accidentally activated.
It will also return the
Dialler back to ready mode after it has been activated (This can ONLY happen prior to the dial out
procedure).
2.
To activate your Smart Dialler, so that it commences to dial out to the stored numbers, you must
press both of the red buttons simultaneously for 1 second. The reason why both red buttons
need to be pressed, is to avoid accidental activation. This is a essential safety feature.
3.
If the Wireless Pendant battery is in good order and the Antenna is upright on the Smart Dialler,
then the working range of the pendant can be up to 150 metres. The range will vary according to
different circumstances.
4.
The Pendant can be worn around the neck or on the wrist. To secure the stainless steel neck band
provided, you must firmly press the neck band pin into the hole at the top end of the pendant.
This action requires a very firm push until you feel the pin click into position. The stainless steel
chain is adjustable by cutting it at the required length.
5.
When you press the yellow pendant button the Smart Dialler is able to determine the level of
charge in the pendant battery and when it falls to a low level the LED Indicator Light turns Red
and a voice message sounds from the Smart Dialler speaker saying
‘Your pendant battery is
low - please change the battery’.
For battery replacements: order online www.carealert.com.au or call 1300 75 85 95 &
select the sales option.
PairinG a PenDant to YoUr smart Dialler Base station
v
Position the function switch, on the rear of the base station, to the ‘set’ position, pick up phone
(if cordless, press talk first) and press star (*) 9.
v
When an ‘L’ (for Learning) appears on the Smart Dialler window press the yellow button and you
will hear a double beep and double flash of the ‘L’, indicating the process was successful.
v
To end, press the hash (#) key on the phone to close the ‘learning’ process.
v
Hang up the phone and slide the function switch on the rear of the Smart Dialler to ‘Alarm’ and
press the yellow button on the pendant. If a door bell chime noise sounds, the pendant was
successfully keyed to the dialler. This means it will only trigger your Smart Dialler when the two
red buttons are squeezed and NOT another dialler in the neighbourhood.
