22
AR1200VIEW
CARDIOLINE
®
is an et medical devices SpA brand
w w w . c a r d i o l i n e . b i z
11 Cleaning and disinfection
11.1 Cleaning the device, electrodes and patient cable
Device:
use a cloth dampened with water or ethyl alcohol. Do not use other chemical products or household detergents.
Electrodes:
remove the electrodes from the patient cable and wash under running water. Do not scratch the electrodes and do
not wash the leads box and the patient socket.
Patient cable:
do not immerse in water, use a cloth dampened with alcohol or an equivalent solvent.
Note: the device cannot be sterilized! The electrodes can be sterilized with ethylene oxide.
11.2 Clean thermal head
To clean the printer thermal head correctly use a cloth slightly dampened with alcohol or an equivalent solution
with the device off.
Proceed as follows:
open the paper feed;
pass the cloth over the dots of the thermal head without pressing too hard.
Warning: the printer thermal head is extremely sensitive to electrostatic potentials. Do not touch it for any
reason. If necessary, handle it after connecting to a ground via a suitable protective bracelet or belt.
11.3 Cleaning the paper feed roller
To clean the paper feed roller correctly, remove it and use a soft cloth lightly dampened with alcohol or an
equivalent solvent, turning the roller to clean the whole surface.
11.4 Cleaning the mark sensor
To clean the mark sensor correctly use a cloth slightly dampened with alcohol or an equivalent solution with the
device off.
Proceed as follows:
remove the paper feed;
pass the cloth over mark sensor without pressing.
