CARDIOSTRONG CST-RX50-2, Руководство по сборке и эксплуатации

Страница: 16 / 60

RX 50
16
Step 5: Connecting the main frame to the beam
1. Place the main frame (002)
upright and insert the aluminium
beam (001) into the opening on
the main frame (002).
2. Mount the aluminium beam (001)
to the main frame (002) with
two washers (413) and two
screws (388A).
3. Tighten the screws using the
tool.
Step 6: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected
to a multiple socket, otherwise it cannot
be guaranteed that the equipment
will be supplied with sufficient power.
Technical errors can result.
1. Remove the cable tie from the aluminium
beam (001).
2. Connect the device to the power
plug and plug the power plug into
a wall outlet that complies with the
instructions in the chapter on electrical
safety.