cardiobull RA17, Руководство пользователя

Страница: 35 / 42

35 / 42
PROGRAM P1~P12
1. P1
～
P12
，
12 fixed diagram.
2. Every time you choose one PROGRAM, correspondent diagram
will display on the center of dot matrix..
3.Diagram choice by turning UP
、
DOWN-Knob
，
and ENTER
for confirmation.
4.After selecting program, blinking diagram will show in dot matrix,
turning UP/DOWN-KNOB for adjusting LEVEL and ENTER -
KEY for TIME setting
，
TIME symbol blinks.
RACE
5 ~ 90 ±1SPM
0.1 ~99.9±0.1
KM(ML)
USER can set SPM of PC as well as distance for race.
USER U1~U4
1.USER can set PROGRAM diagram by himself
2.press ENTER KEY for line setting and
UP
、
DOWN Knob for adjusting LOAD value.
3. One saved value each.
H.R.C.
55%
、
75%
、
90%
、
IN
D
(TARGET)
1. Choice your want H.R.: 55%
、
75%
、
90%
、
IND.
2. (55%
、
75%
、
90%
、
IND) symbol blink during setting, constant
light after choosing and then step to time setting, TIME symbol
blinks.
SCAN
1. TIME&TIME/500M
。
2. & CALORIES switch to display every 6 seconds.
3. DISTANCE switch to display every 6 seconds.
4. STROKES &TOTAL STRORES switch to display every 6
seconds.
TIME/500M 0:00 ~ 99:59
STROKES 0 ~ 9999 STROKES ALARM one
TOTAL
STROKES
0 ~ 9999
2. OPERATION DESCRIPTION
1. Make sure plug in right power adaptor (6V 1000 mA), and regarding with different
country system pin, and then powering on: BI with long tone for 1 second together with
LCD full display for 2 seconds,
2. Powering on (or hold RESET key for 2 seconds) full display. Press START/STOP key
entering MANUAL control mode directly and start exercise..
3. USER display in dot matrix to choose (U1-U4), you can turning knob UP +, DOWN
－
for
choice USER number and input USER data after pressing ENTER for confirmation.
Press ENTER-key for confirmation if everything, it will step to upper key functions, all
blink and wait for USER, turn KNOB UP +, DOWN
－
KNOB for choice, it will jump back
to UX(0-4) choice).
※
USER : U0 ~U4 ( U1 ~ U4 memorized user data; U0- No memory
of data and workout value)
4. ENTER “CONTROL MODE”- MANUAL / PROGRAMS / USERS / H.R.C./ RACE
4-8 Manual
LOAD1 and display in dot matrix after pressing ENTER key for confirmation, now turn
KNOB UP +, DOWN
－
knob for adjusting LOAD value and ENTER key for confirmation,
turn UP +, DOWN
－
KNOB again for setting, Press START and begin to exercise after
finish all functions’ setting (I.e. TIME
、
DISTANCE
、
CALORIES
、
HEART RATE).
4-9 PROGRAM
If choose Program diagram P1-P12 in dot matrix after pressing ENTER -key to program.
After select ideal program diagram to turn KNOB UP +, DOWN
－
KNOB for adjusting