Cardio Zone E-CZ500, Руководство пользователя

Страница: 6 / 28

6
Getting Started - The CardioZone E-CZ500 Elliptical will require some assembly. Unpack
the box in a clear area. Remove packing material. Do not dispose of packing material until
assembly is complete and unit is working properly. Place the unit on a clean level surface for
assembly. Make sure there is easy access to an electrical outlet. Before starting the assembly,
the unit should be placed as close as possible to its final location. Tools have been provided for
use while assembling this product.
Assembly Parts
1. Owner’s Manual
2. Linkage
3. Left and Right Handlebars
4. Console
5. Console Cable
6. Console Mast
7. Rear Cover
8. M8*50mm Hex Bolt - Qty 3
9. M8*12mm Hex Bolt - Qty 4
10. M8*20mm Hex Bolt - Qty 6
11. M5*12mm Screw - Qty 9
Assembly
Figure 1
Locate bag labeled Figure 1. Lift pedal and
place left Linkage onto Sleeve and align
holes. Secure Linkage to unit using four
M8*12 mm Hex Bolts.
Note: Left Linkage will be wrapped in plas-
tic. Right Linkage will already be secured
to the sleeve.
LINKAGE
SLEEVE
M8*12MM HEX BOLT
Figure 1