Cardio Zone E-CZ500, Руководство пользователя

Страница: 9 / 28

9
Assembly
CONGRATULATIONS!
You have completed assembly of your E-CZ500 Elliptical
Figure 6
Attach Rear Cover to Main Frame using five
M5*12mm Philip Head Screws removed in
figure 3. While attaching the Rear Cover,
allow 3 loops to remain exposed.
Note: Do not force Rear Cover back into
place, this will damage Rear Cover.
Warning: Before moving to Figure 7, make
sure that only 3 loops of the Actuator Cable
are exposed. The excess wire should be
placed inside of the rear cover.
Figure 6
REAR COVER
M5*12MM SCREW
Figure 7
Level machine so that it does not
wobble. Leveler feet screw in and out
to level machine. After machine is level,
tighten leveler nut to secure levelers in
place.
Figure 7
LEVELER
ACTUATOR
CABLE