3601-M511-O1 Rev C
•
RD2 Series
8
DISPLAY BOARD
SWITCHES
S3
= (
SETUP
). Press to begin Setup
mode. While in setup, press to
advance to the next setup option.
S2
= (
Up Arrow
). This switch has a
dual purpose. If pressed while in setup,
it will increment the current value by 1.
In normal operation, it is used to
increase display brightness.
S1
= (
Right Arrow
). This switch also has a dual purpose. If pressed while in setup, it will
step back to the previous option. In normal operation, it is used to decrease display
brightness.
CONNECTORS
P2
= ISP (In System Programming) connector
P3
= 15VDC Power connector
P4
= SERIAL 9 terminal connector for serial cable connections.
P5
= IIC Bus (
For Factory Use Only
)
JUMPERS
J1
=Operation mode selection jumper. (Jumper must be on pins 2 and 3 for scoreboard)
Figure No. 6
Содержание RD2
