Cardinal Detecto VET-400, Руководство пользователя

Страница: 8 / 16

1930-M352-O1
v
VET-400
Page 6
ERROR AND STATUS DISPLAYS
Display Meaning
A::A
General error, invalid keypad entry was attempted.
A$A
Attempting to display a negative number greater than –9,999 or a
positive number greater than 99,999
A<:"A
Indicates an attempt to zero a weight outside scale zero range.
(See Four Percent Zero Tracking Range Limit).
A(1+A
Motion is present when indicator is attempting to perform one of the
following operations: Power Up Zero or Zero Weight Display
".3
Indicates calibration is necessary.
4::a
::"a
::
Consult your scale service representative.
$%
Scale weight exceeds scale capacity
$
Displayed to indicate indicator is turning off.
BEFORE YOU CALL FOR SERVICE
PROBLEM POSSIBLE SOLUTIONS
Display does not
turn on AC Operation:
v
Is AC power supply fully inserted into wall receptacle?
v
Check wall receptacle for proper AC power. Try another
electrical appliance in same receptacle, does it work?
v
Check circuit breaker.
v
Has there been power failure?
Battery operation:
v
Check if batteries are installed and correctly.
v
Are batteries discharged?
If Alkaline, remove old batteries and replace with new ones.
If NI-CAD or NiMH, connect the 12 VDC, 1 Amp power
supply's connector into the power jack on the back of the
indicator and then plug the power supply into the proper
electrical outlet to operate the indicator and recharge the
batteries.
Incorrect weight
displayed Insure that scale platform isn't touching an adjacent object.
Have proper operation procedures been followed?
Indicator will not
display weight Refer to Error and Status Displays section.