Cardinal Detecto VET-400, Руководство пользователя

Страница: 4 / 16

1930-M352-O1
v
VET-400
Page 2
UNPACKING INSTRUCTIONS
The VET-400 is shipped in two (2) cartons. One carton will contain the weight indicator and
the other carton will house the scale base (with 15 ft. coiled cable), the Stainless Steel deck or
optional Rubber mat, and the Desk Stand/Wall mount bracket for the indicator.
Before starting to assemble, please unpack carefully and remove all wrappings and fillers.
Inspect the unit for any signs of damage due to shipping, such as exterior dents and scratches.
It is the responsibility of the Purchaser to file all claims for any damages or loss in transit
incurred. Retain packing and shipping carton for return of scale if necessary.
INSTALLATION
Installing the Deck or Rubber Mat
To install the Stainless Steel deck on the scale, place the scale base in front of you on a desk
or table. Lower the deck onto the scale base.
NOTE: If the optional Rubber Mat was
substituted for the Stainless Steel deck, the mat is placed directly on the scale weighbridge.
Interconnections
Both the VET-400 scale base and power connections to the weight indicator are made at the
bottom rear panel of the indicator. Refer to Figure No. 1 for the rear panel layout.
Scale Base Connection
The scale base connection to the weight indicator is made via a 15 ft. coiled cable with a
modular type connector on one end and a 9-pin "D" type connector on the other. The modular
connector of the coiled cable should be inserted into the mating connector socket on the scale
base until it locks into place. The 9-pin connector plugs into a 9-pin "D" type jack located on
the bottom rear panel of the indicator and is secured by two (2) screws.
Power
Supply Scale
Base
Cable
Figure No. 1
Battery
Cover