Cardinal Detecto 8430 Series, Руководство по эксплуатации

Страница: 8 / 20

OPERATION, CONT.
Body Mass Index (BMI) Operation with ID
To Weigh and Calculate BMI
1. Press ON/OFF key to turn indicator on.
2. Press ZERO key to zero weight display. ZERO, GROSS and lb, oz, kg or ST
annunciator will turn on to show scale is ready for use.
3. Press ID/HEIGHT key.
4. Display will change to show id= .
5. Using numeric keys, key-in up to an 11 digit identification number.
6. Press PRINT/ENTER key.
7. Place patient on scale.
8. Press ID/HEIGHT key.
9. If Feet-Inches were selected in setup for height measurement, display will change to
show
FEEt=
.
a. Using numeric keys, enter 1 digit for height in feet and then press PRINT/ENTER
key.
b. Display will change to show
inCH=
.
c. Using numeric keys enter up to 3 digits (# # . #) for height in inches and then press
PRINT/ENTER key or press PRINT/ENTER key if no inches are required.
10. If Centimeters was selected in setup for height measurement, display will change to
show Cn=_ .
a. Using numeric keys enter up to 4 digits (# # # . #) for height in centimeters and
then press PRINT/ENTER key.
11. Read weight and BMI displays.
12. If a printer is connected to scale, press PRINT/ENTER key to print a ticket.
13. Remove patient from scale.
14. Press NET/GROSS key to return to Gross weight mode.
15. Press ZERO key. This will reset tare weight to zero.
16. BMI display and ID will clear when weight returns to zero.
8525-M041-O1 Rev K x 8430 Series
6