Cardinal Detecto 8430 Series, Руководство по эксплуатации, Страница: 11 / 20

HEIGHT ROD INSTRUCTIONS, CONT.
Height Rod Operating Guide
1. Before the person steps onto the scale
platform, the spoon should be rotated to
the horizontal position, and raised well
above the person’s apparent height.
Spoon
Read
Measurement
Here
Inner
Rod
Outer
Rod
2. The person may now step onto the scale
platform. The spoon should be held
horizontal and above the person’s head.
3. Carefully lower the spoon, while keeping i
horizontal, until it rests gently upon the top
of the person’s head. If the person is
shorter than 3' 4" (101.5 cm), push the
latch to the right, while simultaneously
pushing down on the spoon, until the
spoon rests horizontally upon the top of
the person’s head.
t
aise
4. Read the height of the person as follows:
x
If the back of the spoon points to the
outer height rod, then it points to the
correct height.
x If the back of the spoon points to the
inner height rod, then the correct
height is read at the top of the outer
height rod (see “Read” arrow on the
outer height rod).
5. While holding the spoon horizontally, r
the spoon above the person's head. The
person may now step off of the scale
platform. Hold the spoon horizontal until
the person is clear of the height rod.
6. Rotate the spoon back to the vertical
position and adjust the height rod back to
the rest position (i.e. the spoon should be
locked in place within the inner height rod
and the inner rod should be at its lowest
position).
8525-M041-O1 Rev K x 8430 Series
9