Cardinal Health NPWT PRO, Руководство пользователя

Страница: 15 / 32

13
Clinician U
ser Manual
3. Connect the distal end of the SpeedConnect™ tubing with the blue tapered connector to the patient port of the
Canister ( Figure 15 ). Gently twist and push the connector on just enough to secure and seal it. Also, make sure that
the clamp on the SpeedConnect™ tubing is open (
Figure 16
).
Figure 15
SpeedConnect™ Tubing Connector
Canister
Figure 16
Clamp
Power OFF
Power ON/MUTE
Continuous / Intermittent Mode
4. Plug the device’s A.C. Adapter into a suitable 100-240 VAC, 50-60Hz, outlet. Insert the power plug into the
Battery Charging Port on the side of the device (
Figure 14
). The Cardinal Health™ NPWT PRO family of devices
should only be used with the supplied A.C. Adapter. Use of an incorrectly rated adapter could create a shock hazard
for the patient and caregiver.