Cardiac Science Burdick 8300, Инструкция по безопасности продукта

Страница: 23 / 48

70-01047-01 B
System setup
23
Patient cable
Figure 2: Front view
Connect the patient cable via connector on the front of the ECG
device.
◆
Ensure the connector on the cable is arrow-side-up then
firmly push the connector until the arrow point is aligned
with the edge of the ECG device.
For proper patient preparation, skin preparation, and electrode
placement, see the
User’s Guide .
Note: If a lead wire disconnects the system indicates the lead that
has failed in the lower left corner of the display.