Cardi T9-500-EL A2 Series Скачать руководство пользователя страница 15

7                                                                                     English 

 

 

Your CARDI core drill motor (figure 1, Z) is an electric tool that must be used mounted to a 
proper drill stand (X) which must be fastened by an anchoring system (Y). These three 
parts together make a diamond core drill (X+Y+Z), suitable to drill into stone-like materials 
(reinforced or not reinforced concrete, bricks, stone…) using a core bit. Your core drill 
motor conforms with its related regulations. The diamond core drill conforms with the 
regulations if the stand and the anchoring system conform with their related regulations. 
 

G

G

e

e

n

n

e

e

r

r

a

a

l

l

 

 

s

s

a

a

f

f

e

e

t

t

y

y

 

 

r

r

u

u

l

l

e

e

s

s

 

WARNING!

 Read all instructions. Failure to follow all 

instructions listed below may result in electric shock, fire 

and/or serious injury. The term "power tool" in all of the 

warnings listed below refers to your mains operated (corded) 

power tool or battery operated (cordless) powertool.

 

 

SAVE THESE INSTRUCTIONS

 

 

1) Work area 

b) 

Keep working area clean and well lit. Cluttered 

and dark areas invite accidents. 

c) 

Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust. 

Power tools 

create sparks which may ignite the dust or fumes. 

d) 

Keep children and bystanders away while 

operating a power tool. 

Distractions can cause 

you to lose control. 

2) 

Electrical safety

 

a) 

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock. 

b) 

Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded. 

c) 

Do not expose power tools to rain or wet 

conditions. 

Water entering a power tool will 

increase the risk of electric shock. 

d) 

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges or 

moving parts. 

Damaged or entangled cords 

increase the risk of electric shock.

 

e) 

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use

. Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock. 

3) 

Personal safety

 

a) 

Stay alert, watch what you are doing and use 

common sense when operating a power tool. 

Do not use a power tool while you are tired or 

under the influence of drugs, alcohol or 

medication. 

A moment of inattention while 

operating power tools may result in serious 

personal injury. 

b) 

Use safety equipments: always wear eye 

protection. 

Safety equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will 

reduce personal injuries. 

c) 

Avoid accidental starting. Ensure the switch is 

in the off position before plugging in. 

Carrying 

power tools with your finger on the switch or 

plugging in power tools that have the switch on 

invites accidents. 

d) 

Remove any adjusting key or wrench before 

turning the power tool on.  

A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury. 

e) 

Do not overreach. Keep proper footing and 

balance at all times

. This enables better control of 

the power tool in unexpected situations. 

f) 

Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves 

away from moving parts. 

Loose clothes, jewellery 

and long hair can be caught in moving parts. 

g) 

If devices are provided for the connection of 

dust extraction and collection facilities, ensure 

these are connected and properly used. 

Use of 

these devices can reduce dust related hazards.

 

h) 

Use auxiliary handles supplied with the tool. 

Loss of control can cause personal injury.

  

4) 

Power tool use and care

 

a) 

Do not force the power tool. Use the correct 

power tool for your application. 

The correct 

power tool will do the job better and safer at the 

rate for which it was designed. 

b) 

Do not use the power tool if the switch does not 

turn it on and off. 

Any power tool that cannot be 

controlled with the switch is dangerous and must 

be repaired. 

c) 

Disconnect the plug from the power source 

before making any adjustments, changing 

accessories, or storing power tools. 

Such 

preventive safety measures reduce the risk of 

starting the power tool accidentally. 

d) 

Store idle power tools out of the reach of 

children and do not allow persons unfamiliar 

with the power tool or these instructions to 

operate the power tool. 

Power tools are 

dangerous in the hands of untrained users.

 

e) 

Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 

and any other condition that may affect the 

power tools operation. 

lf damaged, have the 

power tool repaired before use. Many accidents are 

caused by poorly maintained power tools. 

f) 

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 

are less likely to binf and are easier to control. 

g) 

Use the power tool, accessories and tool bits 

etc., in accordance with these instructions and 

in the manner intended for the particular type of 

power tool, taking into account the working 

conditions and the work to be performed. 

Use of 

the power tool for operations different from 

intended could result in a hazardous situation. 

5) 

Service

 

a) 

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts. 

This will ensure that the safety of the power 

tool is maintained. 

 
 
 

Содержание T9-500-EL A2 Series













































































Отзывы: