CARBONEX ECHO-PG, Техническое и эксплуатационное руководство, Страница: 5 / 34

E C H O - P G V E R S I O N E N 1
5
3. Certificates
Device met requirement of electromagnetic compatibility in accordance with the European
Union directive no.
89/336/EEC including the changes 91/263/EEC,92/31/EEC and
93/68/EEC and standards harmonized with it protocol no. LKE/043/2004 issued by the
Laboratory of Electromagnetic Compatibility, Institute of Telecommunication and Acoustics
Wroclaw Engineering College. 50-370 Wrocław, ul. WybrzeŜe Wyspiańskiego 27.
The PCA (Polish Centre for Accreditation)
accreditation no AB 167 .
Cage unit met requirement of the European Union directive no.
94/9/WE (ATEX)
and other
standards which are harmonized with them certificate no. KDB 09ATEX023X
issued by the Notified Body no. 1453 Central Mining Institute. Experimental Mine
„BARBARA” 43-190 Mikołów , ul. Podleska 72. The PCA (Polish Centre for Accreditation)
accreditation no. AC038 .
4. Terms of application
4.1. The shaft has to have: tailrope, or there must be two guide ropes, or the conveyance must
be suspended on at least two ropes (does not apply to frequency version D).
4.2. There should be electrical connection between headrope and tailrope or between two
guideropes (does not apply to frequency version D).
4.3. Over the conveyance which we want to get communication should be mounted a pair of
couplers, and second pair of couplers should be mounted in headframe.
4.4. In one shaft there may work only one cage unit in specific frequency version, in the case
of using two devices they have to have different frequency version or one of them should
be switched off. The same applies to two cage units installed in one conveyance.
4.5. Battery BAKS-9 can be charged only by battery charger ŁAE-S3 made by CARBONEX.
4.6. Maintenance may be carried out only by authorized personnel.
4.7. It is forbidden to make any change in device and use the device in another way as
mentioned in this manual.
4.8. Headframe unit should be installed in safe place i.e. not in EX zone.
4.9. The EX input parameters for additional signaling devices:
- contact electrically isolated, dielectric strength 500V,
- Ui ≥ 15V, Ii ≥ 2mA.