CARBONEX ECHO-PG, Техническое и эксплуатационное руководство, Страница: 10 / 34

E C H O - P G V E R S I O N E N 1
10
6.6. Description of faceplate of cage device
• „POWER”-power switch on/off, when red led next to the switch lights means that the
battery voltage is correct, when led flashes means discharging the battery.
• „FTC”- failure of the transmitting coupler yellow led lights when transmitter coupler is
unserviceable not connected or its inductance is too low.
• „FRC”-failure of the receiving coupler yellow led lights when receiver coupler is
unserviceable not connected or its inductance is too low.
• „LTS”-lack of a transmitting signal yellow led lights when there is a lack of carrier
frequency of the transmitter or its level is too low.
•
„LRS”-lack of receiving signal yellow led lights when there is a lack of carrier frequency
of the receiver.
• „ACS”-authorization for Code of Signals green led indicates activation the Code of Signals
button, lights when input no.2 in headframe device is closed.
• „CCS”-confirmation for Code of Signals green led confirms code, lights when input no.1
in headframe device is closed.
• „RDY”-ready green led indicates when cage unit is in ready mode.
• „AB”-authorization for bottom yellow led indicates activation the Code of Signals button
in manipulator, lights when input no.8 in headframe device is closed.
•
„AP”-authorization for platform yellow led indicates activation the Code of Signals button
in cage device, lights when input no.7 in headframe device is closed.
• „BA”-button of announcement, general purpose button.
• „BR”-button of reset, general purpose button.
• „BLOCKADE”-blockade switch, red led next to switch confirms that blockade is in switch
on state, lights when input no.4 in headframe device is closed.
• „ALARM”-alarm button.
• „CODE”-the Code of Signals button.
• „PTT”-push to talk button, pressing this button the microphone is activated.
6.6.1. Description of faceplate of manipulator
•
„POWER”-power red led lights when the battery voltage is correct, when led flashes
means discharging the battery.
• „RDY”-ready green led indicates when cage unit is in ready mode.
• „AB”-authorization for bottom yellow led indicates activation the Code of Signals button
in manipulator, lights when input no.8 in headframe device is closed.
• „CCS”-confirmation for Code of Signals green led confirms code, lights when input no.1
in headframe device is closed.
• „ALARM”-alarm button.
• „CODE”-the Code of Signals button.
6.7. Description of faceplate of headframe device
6.7.1. Power block
There are led indicate the presence of power supply in the power block.
6.7.2. The transmitting block TB
„FTC” failure of the transmitting coupler yellow led not lights when transmitter coupler is
unserviceable not connected or its inductance is too low. „LTS” lack of a transmitting signal