Carbolite Gero GPCMA 174, Инструкция по установке и эксплуатации

Страница: 5 / 50

1.0 Introduction
1.1 Scope and Purpose
This product is intended to be used within a laboratory or industrial environment for
the processing or testing of materials at high temperatures under a modified
atmosphere.
It is supplied with a pre-fitted metal A105 retort designed for use with typically inert
gases, nominally Argon (Ar) or Nitrogen (N).
It must be installed, commissioned, and operated in accordance with the instructions
contained within this manual, and only by trained personnel.
For maintenance assistance, please contact Carbolite Gero.
Note: Depending on customer specifications at the time of order, this product may
incorporate bespoke design features that are not covered in this manual. Please
refer to the supplementary product documentation pack and/or contact Carbolite
Gero for additional assistance.
Note: If this product is used for any application other than its intended
purpose, as stated by Carbolite Gero, the protection provided by this
equipment may be impaired.
Note: Failure to comply with the instructions as stated within this manual will
constitute misuse and subsequently void any warranty provided by Carbolite Gero.
This product is supplied with a documentation pack, including instruction
manuals and supplementary technical information. Read all documentation
before proceeding with the installation and operation of this product.
1.1.1 Responsibilities
The customer is responsible for conducting their own risk assessment and ensuring
that any materials to be processed within the product are suitable to be safely heated
to the required temperature, and that appropriate safety measures are taken when
handling such materials:
l
Any material that is combustible or liable to cause explosions or generate com-
bustible gas must not be processed unless the product is supplied with specialist
equipment designed to manage such reactions
5