13
Turn the ignition switch from the OFF position to the
ON position 3 times leaving it in the OFF position the
third time.
OFF
ON
3X
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep repressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the next feature.
One Chirp /
Two Chirps /
Three Chirps /
Four Chirps /
Button
LED One Pulse
LED Two Pulse
LED Three Pulse
LED Four Pulse
(Factory Default Setting)
0.8 Second
Door Lock Pulses
0.6 Second
Door Lock Pulses
3.5 Second
Door Lock Pulse
Door Lock with
“Comfort Feature”
See Note Below
ON
Turn On the Ignition
3 long chirps and 3 flashes of the
parking lights will confirm exit of
the programming mode.
Note: Waiting 15 seconds after the
last command will also cause the
system to automatically exit the
programming mode.
Comfort Feature:
Some vehicles have a special “Comfort Feature”. When you lock the door with the key, you have to hold the key in the
lock position for about 5 to 7 seconds and the windows will close automatically. If you wish the vehicle’s Comfort
Feature to be activated when you remotely lock the doors, program Door Lock with Comfort Feature “ON”.
5 Chirps = 0.8 Second Double Pulse Unlock
6 Chirps = 0.6 Second Double Pulse Unlock
3X + 1X (Hold)
Before 15 seconds has passed, push and release the
valet switch 3 times then push the valet switch a fourth
time and hold it down until 2 short chirps/beeps + 1
long chirp/beep is heard then release it. You are now in
Part 2 programming mode.
Channel #3 Output is
Single Pulse
Channel #3 Output is
Latched Until the Ignition
Key is On
Channel # 3 Output is On
for 15 Seconds then is Off
Channel # 3 Output is On
for 30 Seconds then is Off
Light Blue Wire Has (-) 2nd
Unlock Output Function
Light Blue Wire has (-)
Factory Alarm Disarm Output
Function
Black/White Wire has (-)
Domelight Supervision
Output
Black/White Wire has (-)
Channel #4 Single Pulse
Output
Step 1
Step 2
Alarm Feature Programming (Part 2)
Step 3
Step 4
PLUS-4900-IM.qxp 4/30/09 3:06 PM Page 13
