docs.carbide3d.com
10/02/2020
Version 1.0
36
3.
Attach Y-Axis proximity switch to the mount on the
outside of the Y2-carriage. See
Fig. 38
.
a.
Locate the Y-Axis proximity switch exiting
the drag chain at the Y-Axis head bracket.
b.
Position the proximity switch with the red
LED facing out and the target pointing to
the rear of the machine.
c.
Align the s
witch’s two mounting slots with
the two threaded inserts on the face of
the mount.
d.
Use a 2.5mm hex key and two (2)
M3
×
18mm SHCS to secure.
e.
Before fully tightening the screws, slide
the switch as far to the FRONT as it will go.
Figure 38
