FOR TECHNICAL SUPPORT CALL
1800 658 111
WDS-4080P
4.
Reduce tension on the conveyor
feed belt by rotating both the
inboard and outboard conveyor feed
belt tracking adjustment screws in a
counter clockwise direction.
Fig. M3 & M4
5.
Remove the used conveyor feed
belt by grasping both sides of the
belt. Gently lift the conveyor table
as you slide off the conveyor feed
belt. If the belt will not move, further
reduce the tension on the feed belt
and ensure you are lifting the table
high enough to allow the feed belt to
slide off.
Fig. M5
6.
To install the replacement conveyor
feed belt, follow step 5 through 2 in
reverse order. Center the new feed
belt on the conveyor feed belt table
and evenly tension the new feed
belt using the inboard and outboard
tracking adjusters. If you experience
tracking problems, consult the
conveyor feed belt tracking
adjustment section.
Fig. M5
MACHINE ADJUSTMENTS
Fig. M3
Fig. M4
24
