9
ASSEMBLE SWITCH AND MOTOR
1. Mount the switch on the front plate
with 2 Phillips head screws (3/16" x 1/2"),
hex nuts (3/16") and star washers (M5).
(Fig.8)
wiring the on/off switch
Fig.8
2. Place the motor in the motor plate so
the motor pulley is directly under the
pulley slot in the top of the stand. Fasten
the motor, which should be placed on both
sides of the motor plate. (Fig.9)
Fig.9
3. Wiring Dragram
These wiring colors are not specified except for the green ground wire. (Fig.10)
Fig.10
