3
IMPORTANT
As with all power tools there is a certain amount of hazard involved with the operation and use of the tool. Using the tool
with respect and caution will considerably lessen the possibility or personal injury. However, if normal safety precautions are
overlooked or ignored, personal injury to the operator may occur.
SAFETY RULES
1. KEEP GUARDS IN PLACE
and in working order.
2. REMOVE ADJUSTING KEYS AND WRENCHES.
Form a habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
3. KEEP WORK AREA CLEAN
.
Cluttered areas and benches invite accidents.
4. DON'T USE IN A DANGEROUS ENVIRONMENT.
Don't use power tools in damp or wet locations or expose them
to rain. Keep work areas well lighted.
5. KEEP CHILDREN AWAY.
All visitors should be kept a safe distance from work area.
6. MAKE WORKSHOP KID-PROOF
with padlocks, master
switches, or by removing starter keys.
7. DON'T FORCE TOOL.
Don't force tool or attachment to do a
job for which it was not designed.
8. USE PROPER TOOL.
It will do the job better and safer for the
purpose it was designed.
9. WEAR PROPER APPAREL.
No loose clothing, neckties,
rings, bracelets or other jewelry that can get caught in moving
parts. Nonslip footwear is recommended. Wear protective hair
covering to contain long hair.
10. ALWAYS USE SAFETY GLASSES.
Also use face mask
when cutting. Everyday eyeglasses only have impact-resistant
lenses and are NOT safety glasses.
11. SECURE WORK.
Use clamps or a vise to hold work when
practical. It's safer than using your hand and it frees both hands
to operate tool.
12. DON'T OVERREACH.
Keep proper footing and balance at
all times.
13. MAINTAIN TOOLS WITH CARE.
Keep tools sharp and
clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
14. DISCONNECT TOOLS
before servicing; when changing
accessories such as blades.
15. REDUCE THE RISK OF UNINTENTIONAL
STARTING
. Make sure switch is in off position before plugging
in tool.
16. USE RECOMMENDED ACCESSORIES.
Consult the
owner's manual for recommended accessorles.
The use of improper accessories may increase risk of injury.
17. NEVER STAND ON TOOL.
Serious injury could occur if the
tool is tipped over or if the cutting tool is accidentally contacted.
18. CHECK DAMAGED PARTS.
Before further use of the tool,
a guard or other part that is damaged should be carefully
inspected. Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any other
conditions that may affect its operation. Damaged parts should
be properly repaired or replaced.
19. DIRECTION OF FEED.
Feed work into a blade or cutter
against the direction of the blade or cutter only.
20. NEVER LEAVE TOOL RUNNING UNATTENDED.
TURN POWER OFF.
Don't leave tool until it comes to a
complete stop.
21. OPERATION SHOULD BE SUPERVISED BY SKILLED
PERSON
if user is not experienced in operating this machine.
