Pg.13
Model G0834 (Mfd. Since 12/17)
-5-
Q. 90° Fence Tilt Stop:
Stops fence at 90°.
R. 45° Outward Fence Tilt Stops:
Stop fence
at 45° outward (135°).
S. 45° Inward Fence Tilt Stop:
Stops fence at
45° inward.
Note:
Even when fence is resting against
stops, fence tilt lock must be tightened before
starting machine.
N. Fence Tilt Handle:
Tilts fence throughout
its range of motion from 45° inward to 45°
outward (135°).
O. Fence Lock Lever:
Tightens to secure fence
position along width of tables; loosens to
allow lateral adjustment.
P. Fence Tilt Lock:
Secures fence at any
position in available tilt range.
Fence Controls
K. Depth-of-Cut Scale:
Indicates depth of cut
(per pass).
L. Infeed Positive Stop Bolt:
Allows operator
to quickly adjust the infeed table to perform
heavy or light cuts. It controls the bottom
range of infeed table movement. A jam nut
locks the positive stop bolt in position so it will
not move during operation.
M. Outfeed Positive Stop Bolt:
Adjusts the
outfeed table height. It controls the bottom
range of outfeed table movement. A jam nut
locks the positive stop bolt in position so it will
not move during operation.
Figure 3.
Location of depth-of-cut scale
indicator.
Figure 5.
Location of fence controls.
Figure 6.
Location of fence tilt locks.
Figure 4.
Location of positive stops bolts.
M
L
P
K
O
S
Q
R
N
